10g 850nm SFP Transceiver

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Ge Fiber Channel
• Type: Fiber Optical
• Model NO.: GY-GDA-SR
• Support Network: Ethernet
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: New
• Transport Package: by Plastic Box
• Trademark: GYSUNTEC
• Origin: China
• HS Code: 8517622910
• Production Capacity: 500000pieces/Year

Product Description

10Gbps 850nm MMF SFP+
GY-GDA-SR

    Features

1. RoHS Compliant
2. Low power dissipation < 0.8W
3. Single 3.3V power supply
4. Duplex LC connector
5. Operation Temperature: 0~+70ºC
6. AC-coupled differential serial I/O interface
7. 850nm wavelength
8. Class 1 laser safety
9. Bail delatch for easy removal from cage
10. Immune to ESD, RF fields, and Vcc noise        

Applications

1. Operating temperature: -5ºC to 75ºC       
2. √  8G FC SW
3. RoHS                           
4. Digital Diagnostic Monitor (DDM)

Product Description

The GY-GDA-SR of the Enhanced Small Form Factor Pluggable (SFP+) transceiver module is designed for high performance integrated data link over dual multi-mode optical fibers. The high-speed laser diode and photodiode are provided as a light source and a detector, respectively. Digital diagnostics monitoring information and detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFF 8472, SFF 8431 and IEEE 802.3ae 10GBASE-SR. 

Electrical Characteristics (T_OP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Supply Voltage	Vcc	3.135		3.465	V
Supply Current	Icc			250	mA
Power Consumption	P			1	W
Transmitter Section:
Input differential impedance	Rin		100		Ω	1
Tx Input Single Ended DC Voltage Tolerance (Ref VeeT)	V	-0.3		4	V
Differential input voltage swing	Vin,pp	180		700	mV	2
Transmit Disable Voltage	VD	2		Vcc	V	3
Transmit Enable Voltage	VEN	Vee		Vee+0.8	V
Receiver Section:
Single Ended Output Voltage Tolerance	V	-0.3		4	V
Rx Output Diff Voltage	Vo	300		850	mV
Rx Output Rise and Fall Time	Tr/Tf	30			ps	4
LOS Fault	VLOS fault	2		VccHOST	V	5
LOS Normal	VLOS norm	Vee		Vee+0.8	V	5

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Per SFF-8431 Rev 3.0
3. Into 100 ohms differential termination.
4. 20%~80%
5. LOS is an open collector output. Should be pulled up with 4.7k - 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.

 
Equipment



Packing procedure



Shippment



 

1.Warranty

One~three years Warranty based on products, three monthes free exchange and one year free repairing.

2.OEM is welcome. 

 

3. Any Inquire is welcome. 

  Any inquire will be replied within 24 hours.

5.After-sales service. 
a. From the beginning of production till the successful delivery, we will track on time and post you the status.
b. When the goods arrived, if you have question after inspection, please feel free to contact us, we'll provide solution.

 

 FAQ
1. Can I have a sample order? What is your MOQ?  
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable, We do not have MOQ,1 sample is available.

2. We can be compatible with:   


 
 
3. What is the lead time? 
For usual products. We keep stock, could ship 1~15 days based on qty after PO. For big quantity and special products. Please check lead time with our sales representative.

4. How do you ship the goods and how long does it take arrive? 
We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.

5. Dose your modules compatible to CISCO. (HP/Extreme/Juniper, etc.) 
Yes, we code the optical transceivers compatible to CISCO(HP/Extreme/Juniper).

6. What is your payment terms? 
Usually, we need prepayment by T/T, West Union or Cash.
 
7. What is your warranty time 
We promise 3 years' warranty for all products shipped from us.

8. Could I return the products if there is a quality problem? 
Yes, if there is a quality problem happen, including products defects, uncompatibilty, we could accept free exchange or return and refund.
 
9. How to place an order? 
Please send your inquires to sales or call our sales hotline: [phone]

10. Could I use our own logo and label?
Yes, we could provide a OEM service and make the products with your own label.